To buy the fix you need this data
Model(correctly a model is indicated on the corps of printer, but not in a report!),
Serial Number (Número de série);
CRUM (chip cartridge);
Firmware Version.
This infirmation can be found the printing: Configuration Report and Supplies Information Report.
Printing of report of Samsung M2070 M2070W M2070FW M2070F
Configuration report:Press [Menu] find: {Setup syst. } / {System Setup} click [OK] use [Left] - [Right] buttons to find: {Report} / {Report}click [OK] and select: {Configuration} / {Configuration} and press [OK].
Supplies information: Press [Menu] to find: {Setup syst. } / {System Setup} click [OK]use the [Left] - [Right] buttons to find: {Report} / {Report} click [OK]and select: {Exp. material} / {Supplies Info} and click [OK]..
If you cannot print the report, the data is verified through remote access. If the toner is on a chip or does not work, an additional $7 will be charged to generate the reset without CRUM (without the toner chip).
| Model | Firmware Fix | Compatibility |
| SL-M2070 SL-M2070W | V3.00.01.04-16 V3.00.01.20-30 |
V3.00.01.20 V3.00.01.22-37 |
| SL-M2070F SL-M2070FW | V3.00.01.04-16 V3.00.01.20-27 |
V3.00.01.20 V3.00.01.22-37 |
I received the files, now what?
First of all prepare the printer to receive the file:
With the printer turned off, press and hold the button: [Stop]. Press and hold the [Power] button, after ~ 1 sec release both buttons and quickly press the [Stop] button again. Upon successful entry into forced mode, a message on the MFP display {Download Mode. Press Stop Key} will change to {Wait Image}. The compressed file sent contains: "FIX...", "usbprns2" and INSTRUCTIONS. With the printer in download mode as described above, simply drag FIX onto usbprn2
After this procedure in a few minutes the printer will restart. Remove the toner chip and try printing without a chip. From that moment on, do not use a chip in the toner anymore.
ATTENTION!!!After successfully reprogramming the printer, remove the chip from the cartridge and store it somewhere safe (the chip). In all the cartridges that you are going to use in the printer, the chip must be removed or seal. If you accidentally inserted a new cartridge without removing the chip, the device will be blocked. To unlock it, do the reset using the same chip..
